In this case, you need to check whether your CPU is compatible with the SLAT (Second Level Address Translation). Read: Virtualization support is disabled in the firmware in Windows 2] Verify your CPU is SLAT compatible #īased on user experience and reports, if your CPU is not SLAT capable, your computer may not support built-in virtualization hence the Virtual machine could not be started because the hypervisor is not running error. Reboot your computer and enter BIOS.Navigate to CPU Configuration.Enter Acceleration Section.Find the following options if available and enable them:VT-xAMD-VSVMVanderpoolIntel VT-DAMD IOMMUOnce done, exit the menu and click save changes. Virtualization feature is necessary for the use of hypervisor so you should make sure hardware virtualization is enabled in BIOS by following these steps: 1] Verify if Virtualization is Enabled in BIOS # In addition, make sure Windows is updated to the latest version/build on the machine. Some manufacturers offer BIOS-flashing options directly in BIOS which is much simpler to update BIOS than the usual way. If you need to know the motherboard manufacturer, go to its official website to know the information about the motherboard. An update (if available) might fix the issue. Before you proceed, we suggest you update your BIOS as an outdated BIOS might cause the hypervisor not running issue. Let’s see the description of the applicability of these fixes. If you get the Virtual machine could not be started because the hypervisor is not running when you try to start a Hyper-V enabled virtual machine on your host Windows 11/10 computer, then you can apply our suggested fixes listed below to have this issue resolved on your system. Virtual machine could not be started because the hypervisor is not running # Your hardware does not support virtualization features.BIOS is not set up correctly.You installed other incompatible hypervisors.Hyper-V is not installed completely.Hyper-V is not set up for self-boot.Hyper-V services are not running properly. The following are the reasons you may encounter this issue: Virtual machine could not be started because the hypervisor is not running. Read: Not enough memory in the system to start the virtual machine When this error occurs, you will receive the following full error message.
0 Comments
Leave a Reply. |